Crossvent Learning Center

CV2i+ Features

  •  Patient-triggered ventilation using a proximal flow sensor sensitive enough to allow the smallest of patients to trigger the vent.

  • Flow sensor (pneumotach) also accurately measures the patient's exhaled tidal volume down to 2.0 ml.

  • Built-in rechargeable nickel metal hydride battery provides at least 3 hours of run time on a full charge .

  • Touch screen display that is visible under all lighting conditions, and a full complement of alarm parameters.

In-service Form
High Freq Jet Vent
Setup Guide
CV2i+ Stand-alone Infant Ventilator

CV2i+ Stand-alone Infant Ventilator

CV 3+ Pediatric-Adult Ventilator

CV 3+ Pediatric-Adult Ventilator

CV4+ Infant-Adult Ventilator

CV4+ Infant-Adult Ventilator

Crossvent Tutorial Overview Part 1

* Parts 2-9 are below *

Crossvent Training videos

Additional Accessories

  • Coiled air hose with green and yellow segments and metal fittings at the ends on a white background.

    #1013

    High Pressure Air/O2 Hose

  • Blue dual filter regulators with black caps and metal fittings on a white background.

    #2016

    Dual Flow Meter

  • Medical IV stand with wheels and a small attached tray.

    #1060t

    Ventilator Roll Stand

  • Blue test lung.

    #1021

    Infant Test Lung

  • Quick connect fitting.

    #1042

    Ohmeda Style Quick Connect Oxygen Fitting

  • Quick connect fitting.

    #1043

    Ohmeda Style Quick Connect Air Fitting

  • Quick connect fitting.

    #1044

    Chemtron Style Oxygen Quick Connect Fitting

  • Quick connect fitting.

    #1045

    Chemtron Style Air Quick Connect Fitting

  • Metal clamp with a screw and a black knob

    #2013

    1" Pole Mount Crossvent Bracket

  • A white electrical component with a warning label and mounting base.

    #2013BFR

    Blender/Vent Bracket for Fairfield Rail

  • Close-up of a metal mounting bracket with a black tightening knob.

    #2013BPS

    Pole Mount Swivel Blender/Vent Bracket (vertical or horizontal)

  • bracket to mount ventilator.

    #2013VW

    Crossvent Wall Mount Bracket

  • Mounting bracket

    #2013BGR

    Blender/Vent Bracket for GE Rail

  • Mounting bracket.

    #2013BHR

    Blender/Vent Bracket for GE Rail

  • Metal mounting bracket with adjustable sliding component and a knob for tightening, isolated on white background.

    #2013BVRH

    Blender/Vent Bracket for Vertical Hillrom Rail

  • #1046

    Adapter Tee w/Power Take Off for Jet Connection

  • Service Kit.

    #2006A

    Adapter Kit for mounting a Stand Alone Crossvent 2i+ on a cart shelf

  • A metal rod, four screws, an Allen wrench, a round metal plate, and a small round object on a white background.

    #2014

    12" Stainless Steel pole assembly

  • A metal rod, two mounting brackets, an Allen wrench, screws, and a small circular component.

    #2014B

    Stainless Steel Pole Assembly for Bunnell Jet Application

  • Pneumotach.

    #4409

    Neonatal Pneumotach

  • Medical breathing ventilator Circuitand connectors with clear and red parts.

    Circuits

    Multiple Neonatal Circuit options

  • #1061T

    Deluxe Stand with Basket for TV-100 and Crossvent

  • #2013SAH

    Support Arm

  • #2013SH

    Support Arm Bracket