The NEO2 Blend series represents the ideal blender model for the NICU application. It comes with a 0-15 lpm flow meter close mounted to the left hand side (this makes an perfect spot to attach a resuscitation bag). The right side comes installed with either a 0-1, 0-3.5, or 1-15 lpm flowmeter (depending on the model you choose), which allows for use with a nasal cannula, CPAP, etc. The right side flow meter is installed on an integrated bleed control switch: when the right side is not needed, the bleed flow (3 lpm) can be disabled by pushing and rotating the flow meter forward when needed, simply return it to the upright position and use as desired.
|Height||6.64" (16.9 cm)|
|Width||7.98" (20.3 cm)|
|Depth||4.56" (11.6 cm) w/flow meter on - 6.69" (17 cm) w/flow meter off|
|Weight||3.17 lbs. (1.44 kg)|
2003FF1 NEO2 Blend with 15 lpm and 1.0 lpm flowmeters (green oxygen labeling)
2003FF NEO2 Blend with 15 lpm and 3.5 lpm flowmeters (green oxygen labeling)
2003FF15 NEO2 Blend with 15 lpm and 15 lpm flowmeters (green oxygen labeling)
2003FFA NEO2 Blend with 15 lpm and 3.5 lpm flowmeters (green oxygen labeling) and bottom output
2003FFEU NEO2 Blend with 15 lpm and 3.5 lpm flowmeters (white oxygen labeling)
2003FFE5 NEO2 Blend with 15 lpm and 15 lpm flowmeters (white oxygen labeling)
2003FFEA NEO2 Blend with 15 lpm and 3.5 lpm flowmeters (white oxygen labeling) and bottom output
2007 Standard input fittings on blender are DISS air and oxygen. If you want NIST input fittings on your blender instead of DISS, add this part number to your order.
|Oxygen Concentraton Range||21-100%|
|Number of ports||2 or 3 (2 occupied by flow meters, bottom port present on 2003FFA model)|
|Left Flowmeter Range||3-15 lpm (1-15 if bleed is on)|
|Right Flowmeter Range||0-1.0, 0-3.5, 1-15 (with 3 lpm bleed on-flowmeter in upright position)|
|Accuracy||+/- 3% full scale|
|Bleed Flow||3 lpm (when active)|
- Hose Kits (2', 3' or 10' long)
- Brackets (Wall Mount, Pole Mount, or virtually any rail or headwall configuration)
- Quick Connect Fittings (Hose kits are configured with DISS fittings...Ohmeda Style and Chemtron Quick Connect fittings are also available)
The Sentinel Kit is an oxygen analyzer (with alarms) that can be connected to an air/oxygen blender. The kit comes with a bracket that positions the analyzer on top of the blender. The analyzer port assembly connects the bottom port of a Bio-Med Devices or Bird blender.and as such does not require a flowmeter dedicated to this task. It can be purchased for existing blenders or along with new blenders.
Hose kit includes a 10' long air hose with female DISS air connections on each end, a 10' long oxygen hose with female DISS connections on each end, and a male-to-male DISS oxygen connector that converts the female oxygen supply input on blender to a male fitting
The 15' dual coiled air/oxygen hoses are ideal for connecting any equipment that must be connected to both an air and oxygen gas source (ventilators, air/oxygen blenders, CPAP devices, high flow cannula devices)
- The coiled nature of the hoses makes them easy to stow during storage or transport (hoses stay up off the floor).
- The coiled nature of the hoses also stay up off the floor during use (no matter how close you get to the wall outlet).
- This does not create a tripping hazard as traditional hoses can.
- Since the hoses are fused together except for the ends, they don't get tangled with one another.
Note: If you are ordering this hose for a blender application, make sure you order the PFIT150 (male-to-male DISS fitting) so the oxygen hose will connect to the oxygen input on the blender.
This male-to-male DISS fitting is used in our blender hose kits to convert the oxygen female input port on our blenders to a male DISS port. If you are contemplating hoses from another source, you may want to have the oxygen input configured with a male fitting, or purchase this fitting separately. If you choose to use the 15' dual coiled hose for your blender, you would want to purchase this item so it would connect appropriately.
This regulator offers several nice features including a built-in o-ring tank washer, built-in protected gauge, and 0-15 lpm flow meter, but the best and most unique feature of all is its ability to be connected to the wall source at the same time as the tank source (via a 50 psi input DISS connection), which allows for a seamless transition from one gas source to the next. It also doesn't cause loud blender alarms when switching over or cause wild swings in oxygen percentage from 21% to 100% or vice versa.