When ordering a blender for your ventilator, be certain to include in your order any hose kits that may be required to connect your blender to a gas source and the ventilator.  The available Hose Kits are:

Crossvent

• 2005CV - used to mount a separate blender below the Crossvent on the Heavy Duty Stand, Catalog #1060-5H.  It includes the Pole Mount Bracket to mount the Blender to the Heavy Duty Stand plus all high pressure hoses and fittings necessary to connect the blender which would not have been originally supplied with the Crossvent.

IC-2A

• 2005IC - Used to mount the blender directly to the top of the IC-2A.  It includes all high pressure hoses and fittings necessary to connect the blender which would not have been originally supplied with the IC-2A.

• 2005ICH - used to mount the blender below the IC-2A on the Heavy Duty Stand, Catalog #1060-5HM.  It includes the Pole Mount Bracket to mount the Blender to the Heavy Duty Stand plus all high pressure hoses and fittings necessary to connect the blender which would not have been originally supplied with the IC-2A.

• 2005ICHC - used to mount the blender below the IC-2A with E cylinders on the Heavy Duty Stand, Catalog #10605HM.  It includes the Pole Mount Bracket to mount the Blender to the Heavy Duty Stand plus all high pressure hoses and fittings necessary to connect the blender which would not have been originally supplied with the IC-2A.

• 2005MV - used to connect the blender to the MVP-10.  It includes all high pressure hoses and fittings necessary to connect the blender which would not have been originally supplied with the MVP-10.  It does NOT include a Pole Mount Bracket for the blender.  If a bracket is needed, order Catalog #2013B for a 1" pole or 2013BH for the Heavy Duty (2") Stand.

Blender

• 2006 - 10' Air Supply Hose and 10' Oxygen Supply Hose with coupler to connect a blender to gas supply sources.  This kit is not required in addition to the kits above, but is offered for the blender alone.