Transport Ventilators   |   Air/Oxygen Blenders   |   MRI Ventilators

Any Questions? +1-800-224-6633

2004 High/Low Blender (3 ports)


Dimensions & Weight
Height 5.3" (13.5 cm)
Width 4.77" (12.1 cm)
Depth 4.56" (11.6 cm)
Weight 2.53 lbs. (1.15 kg)

 

Included Accessories

Blenders do not come with any standard accessories. Please consider the following when placing your order:
  • Hose Kits (2', 3' or 10' long)
  • Brackets (Wall Mount, Pole Mount, or virtually any rail or headwall configuration)
  • Quick Connect Fittings (Hose kits are configured with DISS fittings...Ohmeda Style and Chemtron Quick Connect fittings are also available)

 

Optional Accessories

10' Hose Kit 10' Hose Kit
P/N: 2006
» Learn More

Hose kit includes a 10' long air hose with female DISS air connections on each end, a 10' long oxygen hose with female DISS connections on each end, and a male-to-male DISS oxygen connector that converts the female oxygen supply input on blender to a male fitting

2' Blender Hose Kit (w/2' Air and Oxygen Hoses) 2' Blender Hose Kit (w/2' Air and Oxygen Hoses)
P/N: 20062
3' Blender Hose Kit (3' Long Air and Oxygen Hoses) 3' Blender Hose Kit (3' Long Air and Oxygen Hoses)
P/N: 20063
15' Dual Coiled Air/Oxygen Hose 15' Dual Coiled Air/Oxygen Hose
P/N: 1013
» Learn More Brochure Download

The 15' dual coiled air/oxygen hoses are ideal for connecting any equipment that must be connected to both an air and oxygen gas source (ventilators, air/oxygen blenders, CPAP devices, high flow cannula devices)

  • The coiled nature of the hoses makes them easy to stow during storage or transport (hoses stay up off the floor).
  • The coiled nature of the hoses also stay up off the floor during use (no matter how close you get to the wall outlet).
    • This does not create a tripping hazard as traditional hoses can.
  • Since the hoses are fused together except for the ends, they don't get tangled with one another.

Note: If you are ordering this hose for a blender application, make sure you order the PFIT150 (male-to-male DISS fitting) so the oxygen hose will connect to the oxygen input on the blender.

Male-to-Male DISS Fitting Male-to-Male DISS Fitting
P/N: PFIT150
» Learn More

This male-to-male DISS fitting is used in our blender hose kits to convert the oxygen female input port on our blenders to a male DISS port. If you are contemplating hoses from another source, you may want to have the oxygen input configured with a male fitting, or purchase this fitting separately. If you choose to use the 15' dual coiled hose for your blender, you would want to purchase this item so it would connect appropriately.

Ohmeda Style Quick Connect Oxygen Fitting Ohmeda Style Quick Connect Oxygen Fitting
P/N: 1042
Ohmeda Style Quick Connect Air Fitting Ohmeda Style Quick Connect Air Fitting
P/N: 1043
Chemtron Style Oxygen Quick Connect Fitting Chemtron Style Oxygen Quick Connect Fitting
P/N: 1044
Chemtron Style Air Quick Connect Fitting Chemtron Style Air Quick Connect Fitting
P/N: 1045
Deluxe Oxygen E-Cylinder Regulator Deluxe Oxygen E-Cylinder Regulator
P/N: 1005M
» Learn More Brochure Download

This regulator offers several nice features including a built-in o-ring tank washer, built-in protected gauge, and 0-15 lpm flow meter, but the best and most unique feature of all is its ability to be connected to the wall source at the same time as the tank source (via a 50 psi input DISS connection), which allows for a seamless transition from one gas source to the next. It also doesn't cause loud blender alarms when switching over or cause wild swings in oxygen percentage from 21% to 100% or vice versa.

Deluxe Air E-Cylinder Regulator Deluxe Air E-Cylinder Regulator
P/N: 1006M
Brochure Download
Blender Wall Mount Bracket Blender Wall Mount Bracket
P/N: 2013BW
1 1" Pole Mount Blender Bracket
P/N: 2013B
Blender/Vent Bracket for GE Rail Blender/Vent Bracket for GE Rail
P/N: 2013BGR
Blender/Vent Bracket for Fairfield Rail Blender/Vent Bracket for Fairfield Rail
P/N: 2013BFR
1 1" Pole Mount Blender/Vent Swivel Bracket
P/N: 2013BPS
Blender/Vent Bracket for a Horizontal Rail Blender/Vent Bracket for a Horizontal Rail
P/N: 2013BHR
Blender Bracket for Horizontal 25 mm Rail Blender Bracket for Horizontal 25 mm Rail
P/N: 2013BFEU
Blender Bracket for Vertical 7 mm Rail Blender Bracket for Vertical 7 mm Rail
P/N: 2013BVR
Blender/Vent Bracket for Vertical Hillrom Rail Blender/Vent Bracket for Vertical Hillrom Rail
P/N: 2013BVRH
Blender Bracket for 2 Blender Bracket for 2" Bio-Med Pole
P/N: 2013BH
Tank Brackets for 10605H/M Roll Stand Tank Brackets for 10605H/M Roll Stand
P/N: 1061M